FM-2027-03: Sleeve assembly + Connector assembly + Connecting cable + Heat resistant pad + Iron holder HAKKO FH-200 + Cleaning wire HAKKO 599B + Instruction manual
HAKKO FM-2027 and HAKKO FM-2028 could meet customers’ demands for work in various soldering environments, further improving user-friendliness.
They have the following four features:
1.The sleeve assembly has employed the lock type.
The lock-type sleeve assembly can be attached securely to the connector cover.
To remove the sleeve assembly, draw it out while holding down the lock part.
To remove the sleeve assembly, draw it out in the arrow direction while holding down both the lock parts.
2.When you insert the tip into the sleeve assembly, you will hear it click!
If you don’t hear it click, the tip is not inserted securely.
3.A green sleeve assembly has been added.
The sleeve assembly variation has now increased to four colors: yellow, orange, blue, and green.
Why are the four colors prepared?
ip shapes are identified by color, saving the time needed to check the shapes before work.
Identifying the tip shapes by color prevents you from using the wrong tip carelessly.
This identification method is especially useful when the shapes are the same but differ in size and because the C type differs from the CF type.
1. Differences in appearance
The color of the part incorporated in the connector assembly differs from each other.
2. Differences in function
The HAKKO FM-2027 has a function that indicates the operating status by lighting the LED incorporated in the upper part of the connector assembly (transparent part) in red.
The HAKKO FM-2028 does not have this LED.
To use the functions of the HAKKO FM-2027, it must be connected with the HAKKO FM-202, HAKKO FM-203, HAKKO FM-204, HAKKO FM-205 or HAKKO FM-206.
The HAKKO FM-2027 can be also used together with the HAKKO FX-951 and HAKKO FX-952, but in this case the LED stays lit irrespective of operating status.
