Specification
Wall Bracket, IP54, Class I
– Protection against mechanical impact IK10 on body and optical part.
– High-pressure Die Cast Aluminium alloy body and components.
– Extruded Aluminium S6063 alloy body with low copper content.
– Nano Ceramic surface conversion, resistant to corrosive environment.
– Luminiare primarily coated with epoxy resin and top coated with UV stabilized polyester powder and cured in digital temperature controlled chamber at 200°C.
– Self-extinguishing high impact resistant prismatic polycarbonate diffuser with UV stabilized additive. Material from Teijin – Japan.
– Weather resistant silicone gasket. Working temperature -40°C to +200°C.
– External screws are in stainless steel with protection dipping.
– Cable entry protected by weather proof EPDM grommet and to be used with H05RN-F/ H07RN-F cable with 7-10mm. diameter.
– E27 lampholder in ceramic body from Vossloh Schwabe or equivalents. VDE/ ENEC approved.
– Vacuum impregnated magnetic ballast for HID lamp from Vossloh Schwabe/ BAG Electronics or equivalents. ENEC approved.
– Aluminium case capacitor with over pressure safety device from Italfarad or equivalents. ENEC approved.
– Tinned copper conductor with silicone insulated internal wire from ENCO or equivalents. IMQ approved. Working temperature -40°C to
+180°C.
– Assembled with quick connector for cable with cross section up to 2.5mm² from ADELS or equivalents. VDE approved.
– Class1 luminaire provided with the earth connection.
– Installation work has to be carried on according to the enclosed installation manual.
