Specification
Area Light, IP65, Class I
– IEC 60598-1 General Requirement
– IEC 60598-2-1 Fixed Luminaires
– Protection against mechanical impact IK08 on body and IK07 optical part.
– Luminaires Body Housing High-pressure Die Cast Aluminium alloy body and components.
– High-pressure Die Cast Aluminium alloy body and components.
– Coating Process Nano Ceramic surface conversion, resistant to corrosive environment.
– Luminiare primarily coated with epoxy resin and top coated with UV stabilized polyester.
– Cured in digital temperature controlled chamber at 200°C.
– Impact resistant safety tempered glass cover. Able to withstand the temperature up to 250°C.
– High efficiency engineering designed Deep-Draw forming reflector.
– Gasket Post-cured treated silicone gasket. Temperature and weather resistant.
– Gasket working temperature -40°C to +200°C.
– External screws are in stainless steel with protection dipping.
– High efficiency LED module utilized Vossloh Schwabe.
– Assembled on MCPCB and mounted on to heat conductive material.
– Tested to be operated under maximum ambient environment up to +40°C.
– High quality constant current LED driver.
– Tinned copper conductor with silicone insulated internal wire from ENCO or equivalents.
– Internal wire IMQ approved. Working temperature -40°C to +180°C.
– Terminal block in GFR PA6.6 for cable with cross section up to 2.5mm². VDE approved.
– Class1 luminaire provided with the earth connection.
– Installation work has to be carried on according to the enclosed installation manual.
