Specification
Steplight, IP55, class III
– Protection against mechanical impact IK07 on body and optical part.
– High-pressure Die Cast Aluminium alloy body and components.
– Nano Ceramic surface conversion, resistant to corrosive environment.
– Luminiare primarily coated with epoxy resin and top coated with UV stabilized
polyester powder and cured in digital temperature controlled chamber at 200°C.
– Self-extinguishing high impact resistant clear polycarbonate diffuser with
UV stabilized additive. Material from Teijin – Japan.
– Weather resistant silicone gasket. Working temperature -40°C to +200°C.
– External screws are in stainless steel with protection dipping.
– Cable entry protected by weather proof EPDM grommet and to be used with
H05RN-F/ H07RN-F cable with 6-8mm. diameter.
– High efficiency LED module utilized Philips Lumiled chips.
– Assembled on MCPCB and mounted on to heat conductive material.
– The whole systems tested to be operated under maximum ambient environment up to +40°C.
– Driver is not included and has to be ordered separately.
– Terminal block in GFR PA6.6 for cable with cross section up to 2.5mm². VDE approved.
– Installation work has to be carried on according to the enclosed installation manual.
