Specification
Spotlight, IP65, Class I
– Protection against mechanical impact IK08 on body and IK07 optical part.
– High-pressure Die Cast Aluminium alloy body and components.
– Nano Ceramic surface conversion, resistant to corrosive environment.
– Primarily coated with epoxy resin and top coated with UV stabilized polyester powder.
– Cured in digital temperature controlled chamber at 200°C.
– Impact resistant safety tempered glass cover, withstand the temperature up to 250°C.
– High performance anodized spun aluminium reflector.
– Adjustable Optic Adjustable aiming unit through graduated scale.
– Post-cured treated silicone gasket. Temperature and weather resistant.
– Silicone gasket working temperature -40°C to +200°C.
– External screws are in stainless steel with protection dipping.
– Cable entry protected by M20 cable gland.
– To be used with H05RN-F/ H07RN-F cable with 7-13mm. diameter.
– G12 lampholder in ceramic body from BJB or equivalents. VDE/ ENEC approved.
– Vacuum impregnated magnetic ballast for HID lamp from Vossloh Schwabe or equivalents.
– Aluminium case capacitor with over pressure safety device from Italfarad or equivalents.
– Electronic ignitor with automatic switch-off function from Vossloh Schwabe or equivalents.
– Tinned copper conductor with silicone insulated internal wire from ENCO or equivalents.
– IMQ approved. Working temperature -40°C to +180°C.
– Tinned copper conductor with PTFE insulated internal wire from EMC Colosio or equivalents.
– IMQ approved. Working temperature -40°C to +250°C.
– Terminal block in GFR PA6.6 for cable with cross section up to 2.5mm². VDE approved.
– Class1 luminaire provided with the earth connection.
– Caution Installation work has to be carried on according to the enclosed installation manual.
