Specification
Pole Top, IP55, Class I
– Protection against mechanical impact IK09 on body and IK07 optical part.
– High-pressure Die Cast Aluminium alloy body and components.
– Extruded Aluminium S6063 alloy body with low copper content.
– High Strength Cast Aluminium alloy component.
– Nano Ceramic surface conversion, resistant to corrosive environment.
– Luminiare primarily coated with epoxy resin and top coated with UV
stabilized polyester powder and cured in digital temperature controlled chamber at 200°C.
– Weather resistant extruded PMMA cover from Italy. Surface Hardened.
– Cone-shaped sand blasted aluminium reflector.
– Post-cured treated silicone gasket. Temperature and weather resistant. Working temperature -40°C to +200°C.
– External screws are in stainless steel with protection dipping.
– G12 lampholder in ceramic body from BJB or equivalents. VDE/ ENEC approved.
– Vacuum impregnated magnetic ballast for HID lamp from Vossloh Schwabe/ BAG Electronics or equivalents. ENEC approved.
– Aluminium case capacitor with over pressure safety device from Italfarad or equivalents. ENEC approved.
– Electronic ignitor with automatic switch-off function from Vossloh Schwabe or equivalents. ENEC approved.
– Tinned copper conductor with silicone insulated internal wire from ENCO or equivalents. IMQ approved. Working temperature -40°C to +180°C.
– HID control gear wired with double insulated silicone cable and compatible to be operated under ignition voltage up to 5KV.
– Terminal block in GFR PA6.6 for cable with cross section up to 2.5mm². VDE approved.
Class1 luminaire provided with the earth connection.
– Installation work has to be carried on according to the enclosed installation manual.
