Specification
Pole Top, IP65, Class I
– Protection against mechanical impact IK09 on body and optical part.
– High-pressure Die Cast Aluminium alloy body and components.
– Nano Ceramic surface conversion, resistant to corrosive environment. Luminiare primarily coated with epoxy resin and top coated with UV stabilized polyester powder and cured in digital temperature controlled chamber at 200°C.
– Impact resistant safety tempered glass cover. Able to withstand the temperature up to 250°C.
– Glass flushes to the front cover, no accumulation of dust and water.
– Secondary reflector made from injected GFR polymer with bone structure with white coated aluminium.
– Post-cured treated silicone gasket. Temperature and weather resistant. Working temperature -40°C to +200°C.
– External screws are in stainless steel with protection dipping.
– Cable entry protected by weather proof EPDM grommet and to be used with H05RN-F/ H07RN-F cable with 7-10mm. diameter.
– G12 lampholder in ceramic body from BJB or equivalents. VDE/ ENEC approved.
– Vacuum impregnated magnetic ballast for HID lamp from Vossloh Schwabe/ BAG Electronics or equivalents. ENEC approved.
– Aluminium case capacitor with over pressure safety device from Italfarad or equivalents. ENEC approved.
– Electronic ignitor with automatic switch-off function from Vossloh Schwabe or equivalents. ENEC approved.
– Tinned copper conductor with silicone insulated internal wire from ENCO or equivalents. IMQ approved. Working temperature -40°C to +180°C.
– HID control gear wired with double insulated silicone cable and compatible to be operated under ignition voltage up to 5KV.
– Terminal block in GFR PA6.6 for cable with cross section up to 2.5mm². VDE approved.
Class1 luminaire provided with the earth connection.
– Installation work has to be carried on according to the enclosed installation manual.
