Specification
Area Light, IP65, Class I
– IEC 60598-1 General Requirement
– IEC 60598-2-1 Fixed Luminaires
– Protection against mechanical impact IK08 on body and IK07 optical part.
– Luminaires Body Housing High-pressure Die Cast Aluminium alloy body and components.
– High-pressure Die Cast Aluminium alloy body and components.
– Coating Process Nano Ceramic surface conversion, resistant to corrosive environment.
– Luminiare primarily coated with epoxy resin and top coated with UV stabilized polyester.
– Cured in digital temperature controlled chamber at 200°C.
– Impact resistant safety tempered glass cover. Able to withstand the temperature up to 250°C.
– High efficiency engineering designed Deep-Draw forming reflector.
– Gasket Post-cured treated silicone gasket. Temperature and weather resistant.
– Gasket working temperature -40°C to +200°C.
– External screws are in stainless steel with protection dipping.
– Cable entry protected by weather proof EPDM grommet.
– To be used with H05RN-F/ H07RN-F cable with 7-10mm. diameter.
– E27 lampholder in ceramic body.
– Vacuum impregnated magnetic ballast for HID lamp.
– Aluminium case capacitor with over pressure safety device.
– Electronic ignitor with automatic switch-off function.
– Tinned copper conductor with silicone insulated internal wire from ENCO or equivalents.
– HID control gear wired with double insulated silicone cable and compatible to be operated under ignition voltage up to 5KV.
– Terminal block in GFR PA6.6 for cable with cross section up to 2.5mm². VDE approved.
– Class1 luminaire provided with the earth connection.
– Installation work has to be carried on according to the enclosed installation manual.
