Specification
Inground uplight, IP67, Class I : Bi- symmetric light direction
– High-pressure Die Cast Aluminium alloy body and components.
– Front cover in 316 stainless steel brush finished.
– Recessed housing made of GFR polymer.
– Diffuser Impact resistant safety tempered glass cover. Able to withstand the temperature up to 250°C.
– Glass flushes to the front cover, no accumulation of dust and water.
– High performance CNC forming aluminium reflector sheet from Alanod – Germany.
– Adjustable optical unit.
– Post-cured treated silicone gasket. Temperature and weather resistant. Working temperature -40°C to +200°C.
– External screws are in stainless steel with protection dipping.
– Cable entry protected by weather proof EPDM grommet and to be used with H05RN-F/ H07RN-F cable with 7-10mm. diameter.
– High efficiency LED module utilized Vossloh Schwabe. Assembled on MCPCB and mounted on to heat conductive material.
– The whole systems tested to be operated under maximum ambient environment up to +40°C.
– High quality constant current LED driver. Conform to safety standard and electromagnetic compatibility standard.
– Tinned copper conductor with silicone insulated internal wire from ENCO or equivalents. IMQ approved. Working temperature -40°C to +180°C.
– Class1 luminaire provided with the earth connection.
– Pre-wired with 3×1.0mm. H07RN-F neoprene cable from Aristoncavi or equivalents. IMQ approved.
– Equipped with anti-humidity kit.
– Installation work has to be carried on according to the enclosed installation manual.
– The water drainage system must be tested to ensure that it is sufficiency and efficiency.
